Peças

Não são necessárias peças.

Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.
  • Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

Adicionar comentário

Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners. Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.
  • Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

Adicionar comentário

Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop. Carefully pull the top away from the back. Carefully pull the top away from the back.
  • Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.

  • Carefully pull the top away from the back.

Adicionar comentário

Turn the laptop around. Remove the webcam/microphone data cable. Remove the webcam/microphone data cable.
  • Turn the laptop around.

  • Remove the webcam/microphone data cable.

Adicionar comentário

Remove the lower lighting power supply. Remove the signal light power supply and data cable.
  • Remove the lower lighting power supply.

  • Remove the signal light power supply and data cable.

Adicionar comentário

Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display. After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.
  • Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.

  • After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

Adicionar comentário

Carefully remove the screen from the side brackets. Remove the LCD ribbon connector from the display.
  • Carefully remove the screen from the side brackets.

  • Remove the LCD ribbon connector from the display.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Brandon Kirklen

Member since: 11-01-2013

269 reputação

8 Guides authored

Equipe

Cal Poly, Team 7-8, Maness Winter 2013 Membro de Cal Poly, Team 7-8, Maness Winter 2013

CPSU-MANESS-W13S7G8

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 535