Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

  1. Unscrew the three screws from the back panel with Phillips #0 screwdriver.
    • Unscrew the three screws from the back panel with Phillips #0 screwdriver.

    • Remove the back panel.

  2. Locate the two clips holding the RAM chip in place. Apply pressure to each clip, pulling them away from the RAM. One end of the RAM will pop out.
    • Locate the two clips holding the RAM chip in place.

    • Apply pressure to each clip, pulling them away from the RAM.

    • One end of the RAM will pop out.

  3. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox
  4. Gently pull RAM out as shown. Gently pull RAM out as shown.
    • Gently pull RAM out as shown.

  5. To intall a new stick of RAM, carefully insert it into into the RAM slot.
    • To intall a new stick of RAM, carefully insert it into into the RAM slot.

    • Gently push down on the RAM chip until it snaps securely into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Michael Jensen

Membro desde: 18-04-2011

417 Reputação

6 Guias de autoria

Equipe

Cal Poly, Team 4-3, Regan Spring 2011 Membro de Cal Poly, Team 4-3, Regan Spring 2011

CPSU-REGAN-S11S4G3

5 Membros

6 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,575