Peças

Não são necessárias peças.

Unlatch the battery by pushing outward on both latches.
  • Unlatch the battery by pushing outward on both latches.

Adicionar comentário

Slide battery out.
  • Slide battery out.

Adicionar comentário

Remove the five "F2" screws with a Phillips #0 screwdriver.
  • Remove the five "F2" screws with a Phillips #0 screwdriver.

Adicionar comentário

Insert the plastic opening tool above the F1 key. Apply upward pressure until the black plastic strip snaps off. The entire strip will easily come off from left to right.
  • Insert the plastic opening tool above the F1 key.

  • Apply upward pressure until the black plastic strip snaps off. The entire strip will easily come off from left to right.

Adicionar comentário

Find the screws above the F1 and INS keys. Unscrew both screws with a Phillips #0 screwdriver.
  • Find the screws above the F1 and INS keys.

  • Unscrew both screws with a Phillips #0 screwdriver.

Adicionar comentário

Slowly lift the top edge of the keyboard out with your fingers. The ribbon cable located on the back of the keyboard will become accessible.
  • Slowly lift the top edge of the keyboard out with your fingers.

  • The ribbon cable located on the back of the keyboard will become accessible.

Adicionar comentário

Locate the black ribbon cable flap. Detach flap with plastic opening tool.  The ribbon cable will become free.
  • Locate the black ribbon cable flap.

  • Detach flap with plastic opening tool. The ribbon cable will become free.

Adicionar comentário

Your keyboard has now been successfully removed.
  • Your keyboard has now been successfully removed.

Adicionar comentário

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the back panel by removing the three labeled screws with a Phillips #0 screwdriver.
  • Remove the back panel by removing the three labeled screws with a Phillips #0 screwdriver.

Adicionar comentário

Locate and remove the circled screw with a Phillips #0 screwdriver. Locate and remove the circled screw with a Phillips #0 screwdriver.
  • Locate and remove the circled screw with a Phillips #0 screwdriver.

Adicionar comentário

Use the plastic opening tool to pry the CD/DVD drive out of the frame.
  • Use the plastic opening tool to pry the CD/DVD drive out of the frame.

Adicionar comentário

Gently remove the CD/DVD drive from the laptop body.
  • Gently remove the CD/DVD drive from the laptop body.

Adicionar comentário

Remove the circled screws with Phillips #0 screwdriver. Remove the circled screws with Phillips #0 screwdriver.
  • Remove the circled screws with Phillips #0 screwdriver.

Adicionar comentário

Remove these screws from the underside of the laptop with Phillips #0 screwdriver.
  • Remove these screws from the underside of the laptop with Phillips #0 screwdriver.

Adicionar comentário

Disconnect the three circled antennas by lightly pulling upward with your fingers. They should detach easily.
  • Disconnect the three circled antennas by lightly pulling upward with your fingers. They should detach easily.

  • Note: Yours may only have two (2) antennas. Pay attention to the Orientation of the Aluminum bracket with the pads for reinstallation.

Adicionar comentário

Remove the circled screw with a Phillips #0 screwdriver.
  • Remove the circled screw with a Phillips #0 screwdriver.

Adicionar comentário

Detach the 3 marked cables by pulling them out with you fingers as shown.
  • Detach the 3 marked cables by pulling them out with you fingers as shown.

  • This may require some force. They do not come out easily.

Adicionar comentário

Detach the four blue ribbon cables carefully with tweezers. Some of the ribbons may require a flap to be raised because it secures the ribbon in.
  • Detach the four blue ribbon cables carefully with tweezers. Some of the ribbons may require a flap to be raised because it secures the ribbon in.

Adicionar comentário

Remove the top plastic cover by lifting upward from the bottom left-hand corner as shown. The cover will come off easily.
  • Remove the top plastic cover by lifting upward from the bottom left-hand corner as shown. The cover will come off easily.

Adicionar comentário

Remove the circled motherboard screws with a Phillips #0 Scewdriver.
  • Remove the circled motherboard screws with a Phillips #0 Scewdriver.

  • Disconnect this ribbon cable.

Adicionar comentário

Remove these screws with a Phillips #0 screwdriver.
  • Remove these screws with a Phillips #0 screwdriver.

Adicionar comentário

Detach the display cable by gently pulling it out with your fingers.
  • Detach the display cable by gently pulling it out with your fingers.

Adicionar comentário

Remove the motherboard from the left side by gently lifting the left side upward. The boxed volume control may snag on the laptop frame when pulling the motherboard out.
  • Remove the motherboard from the left side by gently lifting the left side upward.

  • The boxed volume control may snag on the laptop frame when pulling the motherboard out.

Adicionar comentário

The motherboard has now been removed from laptop.
  • The motherboard has now been removed from laptop.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Michael Jensen

Member since: 18-04-2011

417 reputação

6 Guides authored

Equipe

Cal Poly, Team 4-3, Regan Spring 2011 Membro de Cal Poly, Team 4-3, Regan Spring 2011

CPSU-REGAN-S11S4G3

5 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 11,135