Introdução

The RAM is an essential part of the computer that helps it run. Without the RAM, the computer will be slower and will not have as much memory. This guide will give the steps necessary to replace the RAM.

Peças

Não são necessárias peças.

  1. Unscrew the 4mm screw from the middle panel using a Phillips #1.
    • Unscrew the 4mm screw from the middle panel using a Phillips #1.

  2. Lift up on the middle panel and remove it.
    • Lift up on the middle panel and remove it.

  3. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Pull the right clip to the right and left clip to the left using your right and left hands respectively.
    • Pull the right clip to the right and left clip to the left using your right and left hands respectively.

  5. Once the clips have been removed, the RAM will pop up.
    • Once the clips have been removed, the RAM will pop up.

  6. Slide the RAM out of its position and remove it.
    • Slide the RAM out of its position and remove it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

NateJohnson

Member since: 26-01-2014

985 reputação

5 Guides authored

Equipe

Cal Poly, Team 9-26, Maness Winter 2014 Membro de Cal Poly, Team 9-26, Maness Winter 2014

CPSU-MANESS-W14S9G26

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 10

Todo: 1,161