Conserte seus objetos Comunidade Loja

Toshiba Satellite L305D-S5900 Keyboard Replacement

Introdução

If your keyboard needs a thorough cleaning or needs a replacement, this is the guide you’re looking for. This guide will show you how to safely remove your keyboard from the computer’s shell.

O que você precisa

  1. Toshiba Satellite L305D-S5900 Keyboard Replacement, Keyboard: passo 1, imagem 1 %32

    • Power off your laptop before beginning disassembly.

    • The plastic strip boxed in red is located above the keyboard of the computer.

    Editar

  2. Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 2, imagem 1 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 2, imagem 2 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 2, imagem 3 %32

    • There are three points of contact boxed in red needed to release located at the far left, the far right and the middle of the plastic strip.

    • Remove the plastic strip from one far end progressively towards the other end using a metal spludger.

    Editar

  4. Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 3, imagem 1 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 3, imagem 2 %32

    • Remove the two 5.3 mm Phillips #1 screws that are beneath the strip.

    • The screws located at the far left and far right when the plastic strip is removed.

    Editar

  5. Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 4, imagem 1 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 4, imagem 2 %32

    • Use the metal spludger to push the keyboard in the direction of the track pad and then lift the keyboard up.

    • Be careful not to pull too fast as there is still another cable attaching the keyboard.

    Editar

  6. Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 5, imagem 1 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 5, imagem 2 %32 Toshiba Satellite L305D-S5900 Keyboard Replacement: passo 5, imagem 3 %32

    • There are two tab boxed in red is located at each side of the ZIF (zero insertion force) connector.

    • Use a metal spludger to push the tab upward in order to release the cable ribbon.

    • Carefully pull out the ribbon cable from the ZIF (zero insertion force) connector.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Sing Yang Cheng

Membro desde: 10/20/16

501 Reputação

Autoria de 5 guias

Emblemas: 6

+3 outros emblemas

Equipe

UMass Dartmouth, Team 3-6, Isaacson Fall 2016 Membro de UMass Dartmouth, Team 3-6, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G6

Membros da 2

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 5

Duração total: 329