1. First, flip the laptop over and use the J1 screwdriver (in the iFixit tool kit) to unscrew the 15 screws indicated in the picture.
    • First, flip the laptop over and use the J1 screwdriver (in the iFixit tool kit) to unscrew the 15 screws indicated in the picture.

    • Make sure to put your screws in a safe place to make sure they do not get lost.

    Adicionar comentário

  2. Once you take the screws out, take the battery off; it should slide off easily.
    • Once you take the screws out, take the battery off; it should slide off easily.

    Adicionar comentário

    • Next, move around the edges of the computer with the metal spudger prying off the casing. You should hear clicks as you do this; this is not the casing breaking, it is just popping off.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Then, carefully take off the back casing of the laptop and set it aside.

    Adicionar comentário

    • This is where the RAM is located that you will be replacing.

    Adicionar comentário

    • There are two clips holding the RAM in place.

    • You will need to hold both of them back to be able to safely remove the RAM.

    • Use plastic spudgers, as the metal spudgers pictured here are not ESD-safe.

    Adicionar comentário

    • Gently remove the RAM and insert replacement.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

David Amodei

Member since: 30-11-2017

145 reputação

Autoria de 1 guia

This guide was done wonderfully. My critique for your group is to be more specific with the direction of how to pull/place the components of the device. Your instructions were simple, yet clear. Great work.

Dan Hartzell - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Todo: 209