Introdução

This guide will show you how to disassemble the Toshiba Satellite C55-A5302 to remove and replace the ODD.

Peças

Não são necessárias peças.

  1. Power down the laptop and remove all power cords. After this is done, turn the laptop over.
    • Power down the laptop and remove all power cords. After this is done, turn the laptop over.

  2. Slide the battery latches outwards away from the center of the device.
    • Slide the battery latches outwards away from the center of the device.

    • The right latch will slide to the right, and left latch to the left.

  3. Lift and remove the battery from the device.
    • Lift and remove the battery from the device.

  4. Use the Phillips #1 screwdriver to unscrew the thirteen screws on the back of your device.
    • Use the Phillips #1 screwdriver to unscrew the thirteen screws on the back of your device.

  5. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the middle plastic cover to expose the hard drive.
    • Remove the middle plastic cover to expose the hard drive.

  7. Using the Phillips #1 screwdriver, remove the two screws holding the hard drive in place.
    • Using the Phillips #1 screwdriver, remove the two screws holding the hard drive in place.

  8. Remove the three screws using the Phillips #1 screwdriver.
    • Remove the three screws using the Phillips #1 screwdriver.

    • Insert you fingers into the rubber ends and gently pull the hard drive out of the device.

  9. Use the Phillips #1 screwdriver to remove the two screws under the hard drive.
    • Use the Phillips #1 screwdriver to remove the two screws under the hard drive.

  10. Use a metal spudger and run it along the edges of the computer to take off the plastic back cover. (Starting near a port usually allows more space for the spudger to be inserted)
    • Use a metal spudger and run it along the edges of the computer to take off the plastic back cover. (Starting near a port usually allows more space for the spudger to be inserted)

  11. Slowly work from one end to the other to lift the back cover off.
    • Slowly work from one end to the other to lift the back cover off.

  12. Grab hold of the optical drive and elevate it slightly and remove it from the computer. Grab hold of the optical drive and elevate it slightly and remove it from the computer.
    • Grab hold of the optical drive and elevate it slightly and remove it from the computer.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 77