Introdução

This guide will walk you through the process to replace your RAM.

Peças

Não são necessárias peças.

  1. Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.
    • Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.

  2. Lift the battery upward with your fingers out of the battery compartment.
    • Lift the battery upward with your fingers out of the battery compartment.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Place the laptop with the bottom facing up.
    • Place the laptop with the bottom facing up.

    • Observe the single 6mm Phillips #1 screw keeping the laptop panels in place.

  5. Using your Phillips #1 screwdriver, unscrew the 6mm screw on the panel, exposing the hard drive and RAM. Using your Phillips #1 screwdriver, unscrew the 6mm screw on the panel, exposing the hard drive and RAM.
    • Using your Phillips #1 screwdriver, unscrew the 6mm screw on the panel, exposing the hard drive and RAM.

  6. Once the ram chip is exposed, push the two clips away from the ram chip to release it. (Clips move in direction of arrows.)
    • Once the ram chip is exposed, push the two clips away from the ram chip to release it. (Clips move in direction of arrows.)

  7. The ram chip will tilt up  after the clips are released.
    • The ram chip will tilt up after the clips are released.

    • Using your fingers, pull the ram chip out at a slight angle.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Walker Tortorigi

Member since: 29-01-2018

468 reputação

4 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 95