Introdução

In this guide, you will learn how to replace the RAM in your computer, using a screwdriver and a plastic opening tool.

Peças

Não são necessárias peças.

  1. Click button 1 to the unlocked position.
    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

    Adicionar comentário

  2. Push and hold button 2 to the left.
    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

    Adicionar comentário

    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

    Adicionar comentário

    • Remove the one 2.5mm Phillips #1 middle plate screw.

    Adicionar comentário

    • Lift up the middle vent panel.

    • Set the panel to the side.

    Adicionar comentário

    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

    Adicionar comentário

    • Using your fingers, unclip the two side clips.

    Adicionar comentário

    • The RAM should now be at a 30 degree angle.

    • Using your fingers, unclip the top two clips.

    • The RAM should just pop out. You can remove it with your fingers.

    • This will apply to either top or bottom RAM.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 63