Peças

Não são necessárias peças.

Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

Adicionar comentário

Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Adicionar comentário

  • Remove the two 3.67 mm screws from the top corners of the keyboard.

Adicionar comentário

  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

Adicionar comentário

  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

Member since: 05-10-2010

714 reputação

13 Guides authored

Equipe

Cal Poly, Team 4-43, Amido Fall 2010 Membro de Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Membros

13 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 3,963