1. Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.
    • Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.

    • Lift the panel up and out of the way.

    Adicionar comentário

  2. The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.
    • The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.

    • After the retainer arms are free, push the chip towards the top of the netbook. This will free the chip for removal.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Push the replacement RAM into the original position.

    • Reattach both securing arms onto the sides of the RAM chip.

    Adicionar comentário

    • Place the panel back into the securing slots and let it rest in its original position.

    • With the bit driver and Phillips #0 bit, secure the panel down with one screw.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Member since: 18-10-2013

943 reputação

9 Guides authored

Equipe

Clemson, Team 14-2, Benson Fall 2013 Membro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 288