Ir para o conteúdo principal

Toshiba NB205 N330PK Keyboard Replacement

O que você precisa

  1. Toshiba NB205 N330PK Keyboard Replacement, Power Button: passo 1, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement, Power Button: passo 1, imagem 2 %32
    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

  2. Toshiba NB205 N330PK Keyboard Replacement: passo 2, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 2, imagem 2 %32
    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

    • Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

  3. Toshiba NB205 N330PK Keyboard Replacement: passo 3, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 3, imagem 2 %32
    • While holding the top of the netbook, flip the netbook over.

  4. Toshiba NB205 N330PK Keyboard Replacement: passo 4, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 4, imagem 2 %32
    • Carefully lift off the power bar assembly for access to the button and receiver.

  5. Toshiba NB205 N330PK Keyboard Replacement, Keyboard: passo 5, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement, Keyboard: passo 5, imagem 2 %32
    • Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.

  6. Toshiba NB205 N330PK Keyboard Replacement: passo 6, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 6, imagem 2 %32
    • Reach under the keyboard and disconnect the electrical connection.

    • Lift the broken keyboard off.

  7. Toshiba NB205 N330PK Keyboard Replacement: passo 7, imagem 1 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 7, imagem 2 %32 Toshiba NB205 N330PK Keyboard Replacement: passo 7, imagem 3 %32
    • Reattach the new electrical connection into the old connection location.

    • Place the keyboard into the original location starting with the bottom first.

    • Gently press the keyboard down to secure it into its original location.

Linha de Chegada

Uma outra pessoa concluiu este guia.

Mason McCaskill

Membro desde: 10/18/13

1.000 Reputação

Autoria de 9 guias

Equipe

Clemson, Team 14-2, Benson Fall 2013 Membro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

Membros da 3

Autoria de 27 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 4

Duração total: 834