1. To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.
    • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

    • Gently lift the panel off.

    Adicionar comentário

  2. With the panel removed, slide the hard drive towards the top of the netbook with moderate force.
    • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

    • This will free the hard drive from its original location.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Obtain a new hard drive.

    • Apply firm pressure to secure the new hard drive into the old hard drive's location.

    Adicionar comentário

    • Place the back panel in its original position.

    • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

    Adicionar comentário

Linha de Chegada

Uma outra pessoa concluiu este guia.

Mason McCaskill

Member since: 18-10-2013

943 reputação

9 Guides authored

Equipe

Clemson, Team 14-2, Benson Fall 2013 Membro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 22

Todo: 1,729