Introdução
The Toshiba Encore Mini is equipped with a built-in front-facing camera and a built-in rear-facing camera. Before replacing either camera, we recommend you back-up any photos (or other data) to an external storage device. Also, you will need a good place to keep track of five very small screws, as you will need them for reassembly.
O que você precisa
-
-
Using the flat end of the spudger, gently pry open the back case from the rest of the device.
-
-
-
Ferramenta utilizada neste passo:Tweezers$4.99
-
Using needle-nose tweezers, carefully push the small white wire connector (red/black wires) out of its housing.
-
Gently remove red/black wire strands from the clips holding them to the back of the screen.
-
-
-
Using needle-nose tweezers, carefully flip up the dark gray cover on the right of the device holding the small orange ribbon in place. (It is approximately 1/4" wide.)
-
With the tweezers, carefully pull the small ribbon out of its housing. It will stay attached to the device at the other end.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipe
UW Tacoma, Team 1-3, Liner SU 2015 Membro de UW Tacoma, Team 1-3, Liner SU 2015
UWT-LINER-SU15S1G3
4 Membros
Autoria de 6 guias
