Tommy Hilfiger Quartz Watch Band Link Replacement

Introdução

Use this guide to replace the watch band links on your Tommy Hilfiger Quartz Watch wristband.

Watch band links are rivet lug components that hold together the wristband and allow the watch to fold. There are often cases where these links need to be removed or added, and performing a dedicated replacement with a few special tools can help you accomplish this.

Before using this guide, it would be preferable to have a general idea of whether you will be adding or removing the watch band links on your watch. The watch should be tight enough that it stays in place, with enough room for your wrist to breathe.

Step 2 focuses specifically on the removal of links. Step 6 is directed towards adding new watch band links.

O que você precisa

Passo 1 Band Link

Tommy Hilfiger Quartz Watch Band Link Replacement, Band Link: passo 1, imagem 1 %32

Place the watch on your wrist and approximate the number of links to be removed.

Editar

Passo 2

Identify the arrows located directly on the links and point them downwards in the south position.

Editar

Passo 3

Tommy Hilfiger Quartz Watch Band Link Replacement: passo 3, imagem 3 %32

Lay and secure the wristband on the watchband holder.

Editar

Passo 4

Tommy Hilfiger Quartz Watch Band Link Replacement: passo 4, imagem 3 %32

Align the tip of the pin pusher on the pin.
Begin tapping the hammer with force to push the link pin out.

Editar

Passo 5

Set aside the link pins and links that have been removed from the watch.

Editar

Passo 6

Tommy Hilfiger Quartz Watch Band Link Replacement: passo 6, imagem 3 %32

In order to add links to the wristband, ensure that the arrows are pointing upwards in the north position.
Secure the wristband on the watchband holder.

Editar

Passo 7

Align the link pins to be added on the holes that connect the desired link to the wristband.

Editar

Passo 8

Tommy Hilfiger Quartz Watch Band Link Replacement: passo 8, imagem 3 %32

Use the hammer to gently tap the link pins into the holes until the pin is completely resting in position.

Editar

Passo 9

Finally, place the watch on your wrist to determine if the links are secure and the fitment is comfortable.
If adjustments need to be made, refer to step 2 for the subtraction of links and step 6 for the addition of links.

Editar