Introdução

Have fun with this great disassembly guide!

Peças

Não são necessárias peças.

The full product in its original state.
  • The full product in its original state.

Adicionar comentário

Remove  the nozzle by pressing the white button on the top of the product just under the name of the brand.
  • Remove the nozzle by pressing the white button on the top of the product just under the name of the brand.

Adicionar comentário

  • Remove the big parts that are inside of the nozzle. These parts consist of a plastic structure with a filter.

Adicionar comentário

  • Remove the rubber fitting from the inside of the nozzle by pulling it from the metal pieces.

Adicionar comentário

  • Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have this signature move you can remove the brush. You can see the video for the signature move.

Adicionar comentário

  • Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have done this signature move you can remove the brush.

Adicionar comentário

  • Right now the whole nozzle is disassembled, except for two small steel rings. These will break if you try to remove them.

Adicionar comentário

  • Now the nozzle is disassembled we can start with the body.

Adicionar comentário

  • Remove 4 screws on the side and 1 screw on the bottom. You'll do this by crosshead screwdriver size number 1.

Adicionar comentário

  • Remove the black clip from the inner top side of the body.

Adicionar comentário

  • Remove the lid from the battery lid by sliding it and after pull it out.

Adicionar comentário

  • Remove the screw after removing the lid above the battery.

Adicionar comentário

  • Seperate the two body parts.

Adicionar comentário

  • Remove the turbine protector in front of the turbine.

Adicionar comentário

  • Pull the battery out. It still has some wires attached to it.

Adicionar comentário

  • Use the pliers to remove the wires from the battery.

Adicionar comentário

  • Pull the charge socket out of the plastic cover.

Adicionar comentário

  • Remove the button from the body.

Adicionar comentário

  • Pull the button off the switch.

Adicionar comentário

  • Remove the last screw with a number 1 screwdriver, next to the electro motor to release the motor + turbine.

Adicionar comentário

  • The remaining part consists of moving pieces that cannot be disassembled.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Koen Tijhuis

Member since: 07-03-2018

313 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 39