Este guia tem alterações mais recentes. Mudar para a última versão não verificada.
O que você precisa
-
-
Using the tweezers, peel back the sticker on the bottom of the device to reveal the two screws
-
-
-
Shove the flat head screw driver into the edge of the device. Pry the faceplate.
-
-
-
-
Identify the green motherboard.
-
Unscrew the threes screws holding the board in place.
-
-
-
Put the green motherboard back into the back plate and secure with the 3 screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.