Conserte seus objetos

Direito de executar reparos

Loja

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Toilet Seat Replacement

Escrito Por: Christopher Carter (e outro colaborador)
  • Comentários: 1
  • Favoritos: 7
  • Execuções: 2

Dificuldade

Muito fácil

Passos

6

Tempo necessário

15 minutos

Partes

1

Sinalizadores

0

Introdução

Is your toilet seat getting old or broken? Use this guide to learn how to replace your old toilet seat with a new one.

Ferramentas

Comprar estas ferramentas

Peças

  1. Measure the size of your toilet bowl to know what size seat to purchase.

    • Measure the size of your toilet bowl to know what size seat to purchase.

    Editar

  2. Twist the tops of the hinges of the currently installed toilet seat and pull toilet seat off to expose the screws. Twist the tops of the hinges of the currently installed toilet seat and pull toilet seat off to expose the screws.

    • Twist the tops of the hinges of the currently installed toilet seat and pull toilet seat off to expose the screws.

    Editar

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

  4. Unscrew the screws to detach the seat. If the screw is not loosening but is spinning as if it were, then hold the back plastic nut so that it can unscrew from the nut. Clean the newly exposed area. This opportunity will not present itself again anytime soon so take advantage of it.

    • Unscrew the screws to detach the seat.

    • If the screw is not loosening but is spinning as if it were, then hold the back plastic nut so that it can unscrew from the nut.

    • Clean the newly exposed area. This opportunity will not present itself again anytime soon so take advantage of it.

    Editar

  5. Insert new special 20mm screws that are provided with the purchase of the toilet seat in the holes and tighten them. Insert new special 20mm screws that are provided with the purchase of the toilet seat in the holes and tighten them.

    • Insert new special 20mm screws that are provided with the purchase of the toilet seat in the holes and tighten them.

    Editar

  6. Then re install the toilet seat by fitting the heads of the screws in the holes on the hinges of the seat.

    • Then re install the toilet seat by fitting the heads of the screws in the holes on the hinges of the seat.

    Editar

  7. Close caps by twisting them in the opposite direction that you did to take off the seat.

    • Close caps by twisting them in the opposite direction that you did to take off the seat.

    Editar
Conclusão

To re-install your previous seat, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Autor

com 1 outro contribuidor

Christopher Carter

Membro desde: 24/02/2015

231 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

Equipe

Cal Poly, Team 24-5, Green Winter 2015 Membro de Cal Poly, Team 24-5, Green Winter 2015

CPSU-GREEN-W15S24G5

3 Membros

4 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 11

Duração total: 1,076