Ir para o conteúdo principal

Titan Airless Sprayer IMPACT 410 Capacitor Replacement

O que você precisa

  1. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Safety precautions: passo 1, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Safety precautions: passo 1, imagem 2 %32
    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

  2. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Unfasten the motor cover: passo 2, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Unfasten the motor cover: passo 2, imagem 2 %32
    • Use a Phillips driver to remove the four 12 mm-long screws (two on either side) securing the motor cover.

  3. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Remove the motor cover: passo 3, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Remove the motor cover: passo 3, imagem 2 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Remove the motor cover: passo 3, imagem 3 %32
    • Pull the motor cover straight off the motor.

  4. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor wires: passo 4, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor wires: passo 4, imagem 2 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor wires: passo 4, imagem 3 %32
    • Use diagonal cutters, or scissors, to cut the two cable ties bundling the capacitor's positive and negative wires.

    • During reassembly, replace the cable ties.

  5. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Disconnect the negative wire: passo 5, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Disconnect the negative wire: passo 5, imagem 2 %32
    • Disconnect the black negative wire's spade connector.

    • Always grip cables by their connectors and not the wires themselves.

  6. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Disconnect the positive wire: passo 6, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Disconnect the positive wire: passo 6, imagem 2 %32
    • Disconnect the red positive wire's bullet connector.

    • Always grip cables by their connectors and not the wires themselves.

  7. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor: passo 7, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor: passo 7, imagem 2 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Isolate the capacitor: passo 7, imagem 3 %32
    • Grip the cable tie and slide it off the capacitors.

  8. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Discharge the capacitors: passo 8, imagem 1 %32
    • If you have already discharged the capacitors, skip this step.

    • Follow this guide to discharge your capacitors.

  9. Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Remove the capacitors: passo 9, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement, Remove the capacitors: passo 9, imagem 2 %32
    • The capacitors are lightly adhered to the motor body.

    • Insert a flathead screwdriver underneath the capacitors, between the bottom cell and the adhesive.

    • Pry up to separate the bottom cell from the motor body.

  10. Titan Airless Sprayer IMPACT 410 Capacitor Replacement: passo 10, imagem 1 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement: passo 10, imagem 2 %32 Titan Airless Sprayer IMPACT 410 Capacitor Replacement: passo 10, imagem 3 %32
    • Insert a flathead screwdriver underneath the capacitors, between the top cell and the adhesive.

    • Pry up to separate the rest of the capacitor from the motor body.

    • Remove the capacitor.

    • During reassembly, if the adhesive is no longer sticky, replace it with double-sided foam adhesive.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Alex Diaz-Kokaisl

Membro desde: 01/16/22

114.268 Reputação

Autoria de 528 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 16.189 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 259