Conserte seus objetos Comunidade Loja

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Introdução

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: passo 1, imagem 1 %32 Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: passo 1, imagem 2 %32

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

    Editar

  3. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: passo 2, imagem 1 %32

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 3 outros contribuidores

Dawoud Daoud

Membro desde: 02/14/24

199 Reputação

Autoria de 2 guias

Emblemas: 3

Equipe

University of Memphis, Team 3-5, Sneed Spring 2024 Membro de University of Memphis, Team 3-5, Sneed Spring 2024

UM-SNEED-S24S3G5

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Duração total: 79