Conserte seus objetos Comunidade Loja

Tightening Mt. Fury Roadmaster Brake Cables

Introdução

This guide is for if you conclude that your difficulty with braking is due to your brake cables being too loose.

O que você precisa

  1. Tightening Mt. Fury Roadmaster Brake Cables, Tightening Mt. Fury Roadmaster Brake Cables: passo 1, imagem 1 %32

    • Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.

    Editar

  2. Tightening Mt. Fury Roadmaster Brake Cables: passo 2, imagem 1 %32

    • Pull the brake cable until proper tension is acquired and the cable shows resistance.

    Editar

  4. Tightening Mt. Fury Roadmaster Brake Cables: passo 3, imagem 1 %32

    • Re-tighten the clamping nut.

    Editar

  5. Tightening Mt. Fury Roadmaster Brake Cables: passo 4, imagem 1 %32

    • If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.

    Editar

  6. Tightening Mt. Fury Roadmaster Brake Cables: passo 5, imagem 1 %32

    • For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.

    Editar
Conclusão

Your brakes should be fully tightened now.

11 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Samantha Rawlins

Membro desde: 01/21/14

476 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

Cal Poly, Team 1-40, Maness Winter 2014 Membro de Cal Poly, Team 1-40, Maness Winter 2014

CPSU-MANESS-W14S1G40

Membros da 4

Autoria de 5 guias

Um comentário

Thank God I didn’t have to watch someone's long winded 10 minute video explaining this.  lol Thank you for that!  Great article.  Thanks for helping me out!

rtinmotion - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 15

Duração total: 3,305