Pular para o conteúdo principal

Introdução

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Peças

Nenhum componente especificado.

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

  3. Lift the cover up and off the device.
    • Lift the cover up and off the device.

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  5. Locate the power supply.
    • Locate the power supply.

  6. Remove the belt connecting the power supply to the motherboard by pulling it out.
    • Remove the belt connecting the power supply to the motherboard by pulling it out.

  7. Remove the red, yellow, and black cable connecting the power supply to the hard drive.
    • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

  8. Remove the two 0.31 inch T-9 screws from the power supply.
    • Remove the two 0.31 inch T-9 screws from the power supply.

  9. Pinch the plastic plugs and lift the power supply up to detach from plugs. All 4 plugs must be detached to remove power supply.
    • Pinch the plastic plugs and lift the power supply up to detach from plugs.

    • All 4 plugs must be detached to remove power supply.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Membro desde: 11-10-2011

41 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 5-33, Amido Fall 2011 Membro de Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,059