Introdução

Use this guide to disassemble the wheel and get access to the interior components of your Thustmaster Ferrari 458 Spider Racing Wheel.

Peças

Não são necessárias peças.

  1. Remove the black 10mm using a JIS #1 screw driver.
    • Remove the black 10mm using a JIS #1 screw driver.

    • There are 12 screws.

    • Two of the screws are deep inside the device you might need to use a slim screwdriver.

    • In the picture you see a plastic opining tool instead of screw driver because we did not have our screw driver when we were taking the picture.

    Adicionar comentário

  2. Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.
    • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

    • Gently pull apart both halves of device to access inside.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Mohammed Alsogair

Member since: 18-10-2017

213 reputação

2 Guides authored

Equipe

USF Tampa, Team S1-G33, Cagle Fall 2017 Membro de USF Tampa, Team S1-G33, Cagle Fall 2017

USFT-CAGLE-F17S1G33

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 15

Últimos 30 dias: 57

Todo: 929