Ir para o conteúdo principal

Thumby Battery Replacement

O que você precisa

    • Take out the wires from the JST SH connector

    • Use this guide to get to the battery.

    • Insert an opening pick in between the battery and the double-sided tape to take it out.

    • Desolder the 2 wires connecting the battery to the motherboard. Remember where the positive and negative terminals are soldered.

    • Take the new battery and solder it to the connectors, being mindful of the + and -

Conclusão

To reassemble your device, follow these instructions in reverse order.

UnRedKnown

Membro desde: 04/20/24

208 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 7

Últimos 30 dias: 21

Duração total: 21