Pular para o conteúdo principal

Introdução

Unfortunately, my iFixit kit has not yet arrived, so I had to use my Wiha drivers and generic spudger. This is pretty simple to do!

Peças

Nenhum componente especificado.

  1. Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver
    • Remove the nine Phillips screws using a Philips 00 screwdriver

  2. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  3. Pry up the case carefully using a spudger. Make sure to not push the spudger in too far, as this could result in internal damage
    • Pry up the case carefully using a spudger.

    • Make sure to not push the spudger in too far, as this could result in internal damage

  4. Lift off the cover, and you're done!
    • Lift off the cover, and you're done!

Conclusão

To reassemble, place the bottom cover on and push until you hear a satisfying click. Keep doing this until the whole cover is secured. Then, screw all of the screws back in!

2 outras pessoas concluíram este guia.

Tanner Lange

Membro desde: 18-03-2018

981 reputação

3 Guias de autoria

Equipe

Francophones Membro de Francophones

Community

8 Membros

8 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 25

Todo: 493