Pular para o conteúdo principal

Introdução

In this guide, you will learn how to open the ThinkPad X1 Carbon and replace the wireless card.

Peças

Nenhum componente especificado.

  1. Using the #0 Phillips screwdriver, loosen the seven cover screws.  they will not come all of the way out.
    • Using the #0 Phillips screwdriver, loosen the seven cover screws. they will not come all of the way out.

  2. Using the spudger pop the cover loose and remove.
    • Using the spudger pop the cover loose and remove.

  3. Use only plastic tools to disconnect battery cable
    • Use only plastic tools to disconnect battery cable

    • Slide battery connector in the direction if the arrow to disconnect.

    • You can leave the battery or remove it using the red circles for the screw locations.

  4. Remove screw holding the wireless card in place.
    • Remove screw holding the wireless card in place.

  5. Carefully remove the antenna cables and slide out the card in the direction of the arrow.
    • Carefully remove the antenna cables and slide out the card in the direction of the arrow.

    • The gray connector is on the top. The black connector is closer to the battery.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Mike

Membro desde: 23-06-2016

1.449 reputação

5 Guias de autoria

Equipe

iReconstruction Membro de iReconstruction

Business

1 Membro

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 16

Últimos 30 dias: 71

Todo: 2,059