Introdução

This guide will help individuals replace the fingerprint reader for the first generation ThinkPad X1 Carbon. It is highly recommended to have the replacement reader ready for installation prior to opening the device.

Unscrew the seven screws located on the back of the device.
  • Unscrew the seven screws located on the back of the device.

Adicionar comentário

Slide the plastic opening tool along the edge of the device to separate the keyboard tray.
  • Slide the plastic opening tool along the edge of the device to separate the keyboard tray.

Adicionar comentário

Flip the device over and open it to lift the keyboard tray from the body of the device.
  • Flip the device over and open it to lift the keyboard tray from the body of the device.

Adicionar comentário

Use the plastic opening tool to gently release the ribbon cable attached to the keyboard.
  • Use the plastic opening tool to gently release the ribbon cable attached to the keyboard.

  • You may now place the device off to the side. The rest of the repair takes place on the keyboard tray.

Adicionar comentário

Locate the Fingerprint Reader and metal frame on the left side of the keyboard tray.
  • Locate the Fingerprint Reader and metal frame on the left side of the keyboard tray.

Adicionar comentário

Unscrew the two silver screws to remove the metal frame.
  • Unscrew the two silver screws to remove the metal frame.

Adicionar comentário

Remove the ribbon cable connected to the board.
  • Remove the ribbon cable connected to the board.

  • Remove and Replace the Fingerprint Reader board and metal frame.

  • This connection does not have a lock, please pull the ribbon away from the board. Do not attempt to lift the connection.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kirby Raines

Member since: 23-01-2018

627 reputação

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 32

Todo: 85