Cancelar

The Sharper Image Literati Tablet Screen Replacement

Escrito Por: Spencer Dodder (e outro colaborador)

Comentários: 0
Favoritos: 0

The Sharper Image Literati Tablet Screen Replacement

Dificuldade

Moderado

Passos

14

Tempo necessário

25 minutos - 1 hora

Introdução

The Sharper Image Literati Tablet may need a screen replacement years or months after purchase, according to reviews online. The screen replacement for The Sharper Image Tablet can be done in approximately 30 minutes to a hour with difficult level in seventeen steps. Screen replacement for The Sharper Image Literati

Ferramentas

Comprar estas ferramentas

Peças

Não são necessárias peças.

Passo 1 Battery

Wedge plastic spudger tool between the back panel and the body of device.

Wedge plastic spudger tool between the back panel and the body of device.
Pry apart the back panel and the device.

Passo 2

Desolder the battery wires from the circuit board.

Desolder the battery wires from the circuit board.

Passo 3

Warm the battery with a hair dryer.
Be carful not to over-heat the battery, this could cause the battery to ignite.

Passo 4

Gently wedge a spudger or thin plastic card between the battery and the body of device. Work the spudger or card along the length of the battery to free it from the adhesive.
Do not bend or puncture the battery. Work slowly and carefully.

Passo 5 SD Port

Use a Phillips #00 screwdriver to remove the fifteen 4mm screws from the silver peripheral edging.

Passo 6

Use a Phillips #00 screwdriver to remove three 4 mm screws from the circuit board containing the headphone jack and power jack.

Passo 7

Remove the circuit board.

Passo 8

Unclip ZIF clip from the chip and unplug ribbon cable.

Passo 9

Detach the peripheral edge with plastic wedge.
This may require a little hard pulling.

Passo 10

Remove peripheral silver edge.

Passo 11

Remove screws from the large metal shielding.

Passo 12

Remove the silver backing plate and the adhered SD port chip.

Passo 13 Screen

Unravel the screen from the silver backing.

Passo 14

Unclip JIF clip and remove ribbin cable.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

with 1 other contributor

Spencer Dodder

Member since: 21-03-2018

533 reputação

4 Guides authored

+1 outro emblema

Equipe

IUPUI, Team S5-G4, Baechle Spring 2018 Membro de IUPUI, Team S5-G4, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G4

3 Membros

4 Guides authored

0 comentários

Adicionar um comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 45