Ir para o conteúdo principal

The Beatles Rock Band Drum Set Drum Pad Replacement

O que você precisa

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: passo 1, imagem 1 %32 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: passo 1, imagem 2 %32
    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 2, imagem 1 %32 The Beatles Rock Band Drum Set Drum Pad Replacement: passo 2, imagem 2 %32
    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

  3. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 3, imagem 1 %32
    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: passo 4, imagem 1 %32
    • The sensor can be peeled off of the drum pad.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Zach Richter

Membro desde: 01/24/17

549 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team 13-3, Banghart Winter 2017 Membro de Cal Poly, Team 13-3, Banghart Winter 2017

CPSU-BANGHART-W17S13G3

Membros da 4

Autoria de 5 guias

Um comentário

Where can you buy replacement sensor?

Barry Howard - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 12

Últimos 30 dias: 62

Duração total: 7,906