Ir para o conteúdo principal

Texas Instruments TI-5130 Printer Unit Replacement

O que você precisa

  1. Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: passo 1, imagem 1 %32 Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: passo 1, imagem 2 %32
    • Flip the calculator over and remove the 4 main 10mm screws with a PH1 screwdriver.

  2. Texas Instruments TI-5130 Printer Unit  Replacement: passo 2, imagem 1 %32
    • Flip the calculator back over and remove the top cover.

  3. Texas Instruments TI-5130 Printer Unit  Replacement: passo 3, imagem 1 %32
    • Disconnect the printing unit from the motherboard by pulling up on the connector – located in the bottom left of the motherboard.

  4. Texas Instruments TI-5130 Printer Unit  Replacement: passo 4, imagem 1 %32
    • Remove the ink cartridge by pushing the tab back then lifting it out to gain access to the screw that holds the printer in place.

  5. Texas Instruments TI-5130 Printer Unit  Replacement: passo 5, imagem 1 %32 Texas Instruments TI-5130 Printer Unit  Replacement: passo 5, imagem 2 %32
    • Using a PH1 screwdriver remove the 10mm screw that holds down the printer unit.

    • Remove the printer unit by lifting it up.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Shannon Perkins

Membro desde: 09/17/15

652 Reputação

Autoria de 3 guias

Equipe

2 comentários

wehre did you buy the replacement printer

Tino ullrich - Responder

what sources are there for TI-5130 printer unit?

Norman Todd - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 10

Duração total: 2,278