Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Face the side of the calculator with the "Texas Instruments" logo towards you, with the logo upright.
-
Slide the front cover down to remove it.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Hold the long side of the calculator on the right or left and turn it 180 degrees so that the back of the calculator faces you.
-
Make sure that the current side facing you is the back by checking that the side has a "reset" button.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the area with a switch on the bottom half of the calculator. Make the sure the switch is on the left side of the switch area, which indicates that it is locked.
-
Slide the switch until it moves from the left side of the button area all the way to the right side.
-
Make sure to hear a click once you move the switch all the way to the right, which indicates the keypad is now removable.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Turn the calculator back to the front as you would normally use it.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Put your hand on the keypad, slide the keypad down about a half inch, and pull up to remove the keypad.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
The batteries should be on the right and left side in the keypad area, with two on each side.
-
Place the tip of your finger in between the batteries, and remove the batteries. Repeat this for the other side as well.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
When reassembling your device, use four new batteries.
-
Cancelar: não concluí este guia.
7 outras pessoas executaram este guia.
Um comentário
what should i do if it just stopped all of a sudden and my battery isn’t like that? Its a square not like A++