Ir para o conteúdo principal
TCA Quadrant Calibration

TCA Quadrant Calibration

Formica Fusca

Formica Fusca e um outro colaborador

Última atualização em November 8, 2024

2 minutos
Muito fácil
Guia colaborativo

Introdução

Ir para o passo 1

How to re-calibrate the levers of the Quadrant, in case they are not aligned or not providing correct input in the Flight Simulator.

    • If you have your Quadrant plugged-in, then unplug it.

  1. TCA Quadrant Calibration, Lower all levers: passo 2, imagem 1 %32 TCA Quadrant Calibration, Lower all levers: passo 2, imagem 2 %32
    • Mover each of the 3 levers to the lowest position.

  2. TCA Quadrant Calibration, Press and Hold the Indicated button.: passo 3, imagem 1 %32
    • Press and hold the button highlighted.

  3. TCA Quadrant Calibration, Plug to USB port While holding the button.: passo 4, imagem 1 %32
    • Connect your Quadrant to USB port while still holding the button.

    • Once connected, wait a few seconds and let go of the button

    • You can connect to:

    • USB port of your PC.

    • USB Port at the back of your TCA Yoke.

    • USB port of your Xbox.

    • Do not use USB Hubs or extension cables.

  4. TCA Quadrant Calibration, Move all levers up: passo 5, imagem 1 %32 TCA Quadrant Calibration, Move all levers up: passo 5, imagem 2 %32
    • Pull each levers to the highest position.

    • Move the levers smoothly for better calibration.

  5. TCA Quadrant Calibration, Press the Indicated buttons: passo 6, imagem 1 %32
    • Press these 2 buttons at the same time.

    • This should save the calibration.

Linha de Chegada

Formica Fusca

Membro desde: 08/01/24

2.587 Reputação

Autoria de 15 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 23

Ao todo: 158