Ir para o conteúdo principal

Sylvania SDVD9004 Screen Replacement

O que você precisa

  1. Sylvania SDVD9004 Screen Replacement, Back cover: passo 1, imagem 1 %32
    • Remove ten 7mm Phillips #0 screws.

    • Remove four 5mm Phillips #0 screws.

  2. Sylvania SDVD9004 Screen Replacement: passo 2, imagem 1 %32 Sylvania SDVD9004 Screen Replacement: passo 2, imagem 2 %32
    • Flip the device over.

    • Lift the top.

  3. Sylvania SDVD9004 Screen Replacement: passo 3, imagem 1 %32
    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

  4. Sylvania SDVD9004 Screen Replacement, Screen: passo 4, imagem 1 %32 Sylvania SDVD9004 Screen Replacement, Screen: passo 4, imagem 2 %32 Sylvania SDVD9004 Screen Replacement, Screen: passo 4, imagem 3 %32
    • Disconnect ribbon

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Rotate screwdriver to peel sticker from ribbon.

    • Place spudger head behind gray tabs on port.

    • Press outward to disengage tab.

    • Repeat on other side.

    • Slide out ribbon.

  5. Sylvania SDVD9004 Screen Replacement: passo 5, imagem 1 %32 Sylvania SDVD9004 Screen Replacement: passo 5, imagem 2 %32
    • Using Philips head screwdriver, remove the two 7 mm screws.

    • Slide off top panel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sarah Henry

Membro desde: 10/31/16

417 Reputação

Autoria de 4 guias

Equipe

Baylor, Team 5-10, Williams Fall 2016 Membro de Baylor, Team 5-10, Williams Fall 2016

BU-WILLIAMS-F16S5G10

Membros da 2

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 616