Introdução

This guide will provide instructions on how to replace the microphone to get sound back to your Swann Doorphone Video Intercom.

Peças

Não são necessárias peças.

  1. Flip the monitor of the Swann Doorphone Video Intercom over so that the underside is facing up.
    • Flip the monitor of the Swann Doorphone Video Intercom over so that the underside is facing up.

    • Remove the six 2 mm corner screws from the back plate of the monitor using the JIS #0 screwdriver.

    Adicionar comentário

  2. Once the screws are removed, grip the black back plate of the monitor and remove from the monitor.
    • Once the screws are removed, grip the black back plate of the monitor and remove from the monitor.

    • The back plate will still be connected to the monitor with a cord of wires that should not be removed.

    Adicionar comentário

    • Using the precision tweezers, grab the sides of the white connector at the bottom of the green board.

    • Pull the white connector towards you to disconnect the board.

    Adicionar comentário

    • Grip the other end of the white connector cable towards the base of the black microphone.

    • Pull gently towards your body to remove the microphone.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Emily Stenke

Member since: 14-02-2018

525 reputação

4 Guides authored

Equipe

USF Tampa, Team S2-G4, Eyestone Spring 2018 Membro de USF Tampa, Team S2-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S2G4

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 36