Ir para o conteúdo principal

Surface Laptop Studio SSD Replacement

O que você precisa

  1. Surface Laptop Studio SSD Replacement, Lower Case: passo 1, imagem 1 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar
    • Remove the rubber cosmetic strip along the outside edge of the back plate with tweezers.

  2. Surface Laptop Studio SSD Replacement: passo 2, imagem 1 %32 Surface Laptop Studio SSD Replacement: passo 2, imagem 2 %32
    • Remove the two rubber feet on the lower case with an opening tool.

  3. Surface Laptop Studio SSD Replacement: passo 3, imagem 1 %32
    • Remove the two screws with a T3 Torx screwdriver.

  4. Surface Laptop Studio SSD Replacement: passo 4, imagem 1 %32
    • Remove the seven screws securing the lower case with a T3 Torx screwdriver.

  5. Surface Laptop Studio SSD Replacement: passo 5, imagem 1 %32 Surface Laptop Studio SSD Replacement: passo 5, imagem 2 %32
    • Lift the lower case gently and set it above the device.

    • Take care not to strain the battery cable as you move the lower case.

  6. Surface Laptop Studio SSD Replacement, Surface Laptop Studio Battery Disconnection: passo 6, imagem 1 %32 Surface Laptop Studio SSD Replacement, Surface Laptop Studio Battery Disconnection: passo 6, imagem 2 %32
    • Disconnect the battery cable by lifting the pull tab until it "clicks."

  7. Surface Laptop Studio SSD Replacement, SSD: passo 7, imagem 1 %32
    • After removing the devices battery, locate the SSD next to the mother board.

  8. Surface Laptop Studio SSD Replacement: passo 8, imagem 1 %32
    • Remove the single 3 mm screw that secures the SSD.

  9. Surface Laptop Studio SSD Replacement: passo 9, imagem 1 %32
    • Slide the SSD directly out of its socket.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

3 comentários

Is this strip tape or it metal? Is there replacements for it? I habe been trying to find it but I can only find tape as an alternative to this part.

Luis Ruiz - Responder

I tried the SSD upgrade with two different WD products (1TB black and 1TB blue) and with both I had problems: Random blue screens and after some time, computed could not find the SSD anymore. Looks like it has something to do with drive consuming too much power but I am not sure. I am now back on original 256 GB SSD, since I can't find what is causing compatibility issues.

Pohistvo123 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 13

Últimos 7 dias: 87

Últimos 30 dias: 393

Duração total: 5,736