O que você precisa
-
-
Push the button on the back to release the lid. (Missing on this example device.)
-
-
-
-
To take the dasher apart, remove the three 5.5 mm Phillips #00 screws embedded in the plastic. **The 3rd screw is behind the hand in the picture
-
Carefully pull the two pieces apart.
-
When you've finished taking apart the dasher, you should have two parts that are shown in the second picture in this step.
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.