Conserte seus objetos Comunidade Loja

Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement

Introdução

This guide shows you how to replace the two activations buttons for the Sublue WhiteShark Mix Underwater Scooter.

  1. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Top Floater Removal: passo 1, imagem 1 %32

    • Remove the black screw by rotating it counterclockwise.

    Editar

  2. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 2, imagem 1 %32

    • Hold the device in place and pull up on the floater.

    Editar

  3. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 3, imagem 1 %32

    • Remove the top floater.

    Editar

  4. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Battery: passo 4, imagem 1 %32

    • Turn the device upside-down.

    Editar

  6. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 5, imagem 1 %32

    • Press the push button in while sliding the planner towards the back of the device to remove the battery panel.

    Editar

  7. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 6, imagem 1 %32

    • A push tab holds the battery in.

    Editar

  8. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 7, imagem 1 %32

    • Push the tab in and pull the battery outward to remove it.

    Editar

  9. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Lower Panel: passo 8, imagem 1 %32

    • Remove the ten Phillips screws on the bottom of the device. Remove the bottom panel.

    Editar

  10. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 9, imagem 1 %32

    • Pull the panel forward.

    • You may need to use pry tools to aid in separating the panels.

    Editar

  11. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Activation Buttons: passo 10, imagem 1 %32

    • There are two action buttons on each side of the main body.

    Editar

  12. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 11, imagem 1 %32

    • Push on the top outer corner of each action button to pop them out of place.

    Editar

  13. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: passo 12, imagem 1 %32

    • After each action button is released, pull outward to remove.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Benjamin J Farland

Membro desde: 10/30/23

269 Reputação

Autoria de 2 guias

Emblemas: 5

+2 outros emblemas

Equipe

UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023 Membro de UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023

UMASSD-GULBRANDSEN-F23S2G6

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Duração total: 42