Peças

Não são necessárias peças.

  1. Flip the phone over so that the screen is facing down.
    • Flip the phone over so that the screen is facing down.

  2. Push the gray lever up towards the top of the phone. Pull up on the battery pack and completely separate it from the phone.
    • Push the gray lever up towards the top of the phone.

    • Pull up on the battery pack and completely separate it from the phone.

  3. Locate the 5 screws around the back casing. Use a three-prong screw bit to remove all 5 screws
    • Locate the 5 screws around the back casing.

    • Use a three-prong screw bit to remove all 5 screws

  4. Use the plastic opening tool and slide it around the phone to pull apart the front and back casing.
    • Use the plastic opening tool and slide it around the phone to pull apart the front and back casing.

  5. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  6. Separate the two cases.
    • Separate the two cases.

  7. Use the plastic opening tool to remove the motherboard from the front case.
    • Use the plastic opening tool to remove the motherboard from the front case.

  8. Locate the 4 white clips of the dispaly. Locate the 4 white clips of the dispaly.
    • Locate the 4 white clips of the dispaly.

  9. Using the plastic opening tool, pull the white clips of the display away from the printed circuit board to unclip display. Using the plastic opening tool, pull the white clips of the display away from the printed circuit board to unclip display.
    • Using the plastic opening tool, pull the white clips of the display away from the printed circuit board to unclip display.

  10. Grasp the display on both sides and carefully pull the display off of the printed circuit board. Grasp the display on both sides and carefully pull the display off of the printed circuit board.
    • Grasp the display on both sides and carefully pull the display off of the printed circuit board.

  11. Using the plastic opening tool, carefully remove the yellow film covering the display connector. Do not damage the yellow film. Ensure that it stays in one piece and does not tear.
    • Using the plastic opening tool, carefully remove the yellow film covering the display connector.

    • Do not damage the yellow film. Ensure that it stays in one piece and does not tear.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Patrick Olmstead

Member since: 22-10-2013

240 reputação

2 Guides authored

Equipe

Clemson, Team 13-5, Benson Fall 2013 Membro de Clemson, Team 13-5, Benson Fall 2013

CLEM-BENSON-F13S13G5

3 Membros

12 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 119