Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Heat to soften back cover sticker.
-
Place the suction cup and try to open a gap.
-
Insert the guitar pick into the gap.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Slide the guitar pick to cut the sticker and remove the back cover.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove two screws by Philips screwdriver.
-
Release all the connectors connecting with loudspeaker assembly.
-
Remove the small vibrator securing bracket.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the securing cover. It's thin and weak, please be careful when remove it.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the loudspeaker assembly finally. Be careful with the flex beside assembly.
-
Cancelar: não concluí este guia.
4 outras pessoas executaram este guia.
2 comentários
this is all good but is there a link to the part ?
EBay search Sony z3 replacement loud speaker cost's around £3-£5