Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Also known as Xperia Z LT36i, Xperia C6603, Xperia C6602, Xperia Z LTE, Xperia Z HSPA+

How to change broken, not working Digitizer or Display.

This procedure is very hard. You must have experience to do this.


Please SUBSCRIBE to my channel ツ

Vídeo de Apresentação

  1. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it.
    • Warm the Battery cover before disassemble it.

  2. 'Carefully' warm the battery too 'Carefully' warm the battery too 'Carefully' warm the battery too
    • 'Carefully' warm the battery too

  3. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.
    • Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.

  4. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  5. This are: main Camera, front Camera and antenna wire Flex cable. Now we can remove the Motherboard. Now we can remove the Motherboard.
    • This are: main Camera, front Camera and antenna wire Flex cable.

    • Now we can remove the Motherboard.

  6. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module.
    • The Headphone connector and the Ringer / Cover / Signal Antenna module.

  7. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.
    • Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.

  8. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it.
    • Warm the Touch screen before you start to disassemble it.

  9. Let's assemble the new spare part. Let's assemble the new spare part. Let's assemble the new spare part.
    • Let's assemble the new spare part.

  10. All's well, that ends well. :) . Did you do it successfully?
Conclusão

To reassemble your device, follow these instructions in reverse order.

76 outras pessoas concluíram este guia.

ZFix

Membro desde: 09/12/2013

171.991 Reputação

307 Guias de autoria

Equipe

Master Techs Membro de Master Techs

Community

294 Membros

935 Guias de autoria

Same procedure with Sony Xperia Z2?

Fredrik - Responder

How do you warm it? With what and what temperature ?

Jeroen - Responder

with a hairdryer for like 3 min on high

Peter Tembo -

With hair dryer.

ZFix - Responder

Same procedure with Sony Xperia Z1? Where do i get the screen parts?

chrgro - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 67

Últimos 30 dias: 419

Duração total: 231,930