Sony Vaio Tap 11 Screen Assembly Replacement

Introdução

In this guide, you will remove the 5 screws holding the device together. In addition, this guide details the various cables connecting the screen to the motherboard.

O que você precisa

Passo 1 Screen Assembly

Sony Vaio Tap 11 Screen Assembly Replacement, Screen Assembly: passo 1, imagem 1 %32

Begin by opening the HDMI/USB port cover on the left edge.
Remove the three #000 headed, 3 mm long screws located underneath the port cover.

Editar

Passo 2

Locate and open the Micro SD slot on the top side of the device.
Remove the two screws located beneath the cover.

Editar

Passo 3

Attach the suction cup to the top right area of the screen.
Pull to separate the screen from the rest of the device.
Be aware of the front camera cable that is still connected to the rest of the device.
Detach the display ribbon cable.