Ir para o conteúdo principal

Introdução

The battery needs to removed before servicing or replacing any other component. The RAM is under a panel held on by two screws. The RAM is easy to remove once the panel is off.

Peças

Nenhum componente especificado.

  1. Turn the laptop over and orient it as shown in the figure.
    • Turn the laptop over and orient it as shown in the figure.

  2. Slide the lock latch to the right to release the battery lock.
    • Slide the lock latch to the right to release the battery lock.

    • Slide and hold the release latch to the left.

  3. Use a fingernail or plastic opening tool lift the battery while holding the release latch.Rotate the battery up and away from you to remove it from the laptop. Use a fingernail or plastic opening tool lift the battery while holding the release latch.Rotate the battery up and away from you to remove it from the laptop.
    • Use a fingernail or plastic opening tool lift the battery while holding the release latch.Rotate the battery up and away from you to remove it from the laptop.

  4. Using a Phillips #1 screwdriver, remove both screws. The screws are secured to the cover with retaining clips.
    • Using a Phillips #1 screwdriver, remove both screws. The screws are secured to the cover with retaining clips.

  5. Lift the thin black plastic cover to access the RAM. Lift the thin black plastic cover to access the RAM.
    • Lift the thin black plastic cover to access the RAM.

  6. Apply light outward pressure to the locks on either side of the RAM. Rotate the RAM up slightly. Pull the RAM toward you to remove it. Apply light outward pressure to the locks on either side of the RAM. Rotate the RAM up slightly. Pull the RAM toward you to remove it.
    • Apply light outward pressure to the locks on either side of the RAM. Rotate the RAM up slightly. Pull the RAM toward you to remove it.

  7. Using the same light outward pressure on the locks, lift the secondary RAM up and slide it away from you to remove it from its slot. Using the same light outward pressure on the locks, lift the secondary RAM up and slide it away from you to remove it from its slot. Using the same light outward pressure on the locks, lift the secondary RAM up and slide it away from you to remove it from its slot.
    • Using the same light outward pressure on the locks, lift the secondary RAM up and slide it away from you to remove it from its slot.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jeremy

Membro desde: 18/03/2015

697 Reputação

4 Guias de autoria

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 316