Introdução

This guide will teach you how to safely replace the battery for the Sony Smart Watch SW2.

Peças

Não são necessárias peças.

Detach the smart watch from the band by pushing on the back of the watch housing.
  • Detach the smart watch from the band by pushing on the back of the watch housing.

    • The power button may fall out once the smart watch is detached.

  • Set aside the power button and watch band as they are no longer needed for further disassembly.

Adicionar comentário

Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
  • Use a plastic opening tool to carefully pry the LCD screen from the watch housing.

Adicionar comentário

Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.
  • Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.

Adicionar comentário

Set aside the detached LCD screen to access the battery.
  • Set aside the detached LCD screen to access the battery.

Adicionar comentário

Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.
  • Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.

    • The connection is already broken in this image and you will not be able to lift the battery this high.

Adicionar comentário

Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.
  • Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.

Adicionar comentário

Once the battery is free from the frame adhesive, desolder the black and red battery wires.
  • Once the battery is free from the frame adhesive, desolder the black and red battery wires.

  • Remove the battery.

I think it’s better to memorize or write down the positive and negative sides of the battery when soldering it back.

Mohammed Alshamrani - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order after the battery is replaced.

Uma outra pessoa concluiu este guia.

Vincent Shiue

Member since: 22-01-2018

229 reputação

2 Guides authored

Equipe

IUPUI, Team S1-G5, Freund Spring 2018 Membro de IUPUI, Team S1-G5, Freund Spring 2018

IUPUI-FREUND-S18S1G5

3 Membros

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 22

Últimos 30 dias: 77

Todo: 330