Conserte seus objetos

Direito de executar reparos

Loja

Sony Radio CD player and cassette player CFD-S05 Circuit Board Replacement

Escrito Por: Ian Nussman (e 3 outros contribuidores)
  • Comentários: 1
  • Favoritos: 1
  • Execuções: 4

Dificuldade

Moderado

Passos

10

Tempo necessário

20 - 30 minutos

Partes

2

Sinalizadores

2

Bullets!

Balas!

Melhor coordenação com marcas e cor/tipo de balas ajudará a tornar mais claro este guia!

Markup Mishap

Acidente de Marcação

Este guia precisa de melhores marcações. Ajude corrigindo ou fazendo algumas marcações.

Ferramentas

Nenhuma ferramenta especificada.

Peças

  1. Unscrew the screws on the top of the radio.

    • Unscrew the screws on the top of the radio.

    Editar

  2. Open the CD and cassette doors and remove the screws in the compartments. To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

    • Open the CD and cassette doors and remove the screws in the compartments.

    • To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

    Editar

  3. Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

    • Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

    Editar

  4. Remove the top of the radio enough to access the wires for removal.

    • Remove the top of the radio enough to access the wires for removal.

    • Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.

    Editar

  6. Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected

    • Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected

    • This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.

    Editar

  7. Unscrew the screws in the circuit board.

    • Unscrew the screws in the circuit board.

    Editar

  8. Unlodge the green headphone jack on the back of the circuit board by pulling on the back of the radio and lifting the circuit board up.

    • Unlodge the green headphone jack on the back of the circuit board by pulling on the back of the radio and lifting the circuit board up.

    • This may be a little difficult and don't pull to hard because the radio may crack.

    Editar

  9. Lift the circuit board out of the radio.

    • Lift the circuit board out of the radio.

    Editar

  10. Insert and align the new circuit board and screw it down.

    • Insert and align the new circuit board and screw it down.

    Editar

  11. Reconnect the wires that were unplugged from the prerequisite steps.

    • Reconnect the wires that were unplugged from the prerequisite steps.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Autor

com 3 outros contribuidores

Ian Nussman

Membro desde: 25/10/2013

881 Reputação

6 Guias de autoria

Emblemas: 11

+8 outros emblemas

Equipe

UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013 Membro de UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G5

2 Membros

6 Guias de autoria

Um comentário

Adicionar um comentário

Where can I get the part?

Francois - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 10

Últimos 30 dias: 30

Duração total: 4,234