Ir para o conteúdo principal

Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement

O que você precisa

  1. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement, Swivel: passo 1, imagem 1 %32
    • Begin by laying the headphones down flat with the speakers facing up.

    • Be sure to unplug the headphones from any other devices.

  2. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: passo 2, imagem 1 %32 Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: passo 2, imagem 2 %32
    • Next, take out the screws that hold the front plate, using a J00 screwdriver.

    • Repeat for both the left and right screws.

    • These screws are very small. It is helpful to have a spot prepared to put the screws to avoid losing pieces.

  3. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: passo 3, imagem 1 %32
    • Now that the screws have been removed, pull away the plastic casing that covers the swivel piece (directly above the speaker).

  4. Sony MDR-XB450AP Extra Bass Headphone Swivel Replacement: passo 4, imagem 1 %32
    • Now that the swivel piece is exposed, use a J00 screwdriver to unscrew the center screw.

    • Repeat this process on both sides if necessary.

    • This center screw is the piece that retains the swivel action, unscrew completely and remove to replace.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 10

Duração total: 3,669