Introdução

In order to keep your device in working order, the tape transport unit may need to be replaced.

Peças

Não são necessárias peças.

  1. Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
    • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

    Adicionar comentário

  2. Remove the five (5) Phillips #00 cassette side screws.
    • Remove the five (5) Phillips #00 cassette side screws.

    Adicionar comentário

    • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

    Adicionar comentário

    • Remove the Phillips #00 screw holding the microphone on.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove the two (2) Phillips #00 screws from lens side cover.

    Adicionar comentário

    • Slide the lens side cover away from camera.

    Adicionar comentário

    • Remove the Phillips #00 screw from the tape transport slider.

    Adicionar comentário

    • Remove the four (4) Phillips #00 screws located on the top of the camera.

    Adicionar comentário

    • Remove the electrical connector from camera.

    Adicionar comentário

    • The tape transport unit is now free from the camera.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Emma

Member since: 06-10-2011

47 reputação

4 Guides authored

Equipe

UW Stout, Team 1-4, Zhou Fall 2011 Membro de UW Stout, Team 1-4, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G4

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 16

Todo: 2,426