Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Sony Ericsson s710a LCD Screen Replacement

O que você precisa

  1. Sony Ericsson s710a LCD Screen Replacement, Battery: passo 1, imagem 1 %32
    • Remove the back cover by sliding it off.

  2. Sony Ericsson s710a LCD Screen Replacement: passo 2, imagem 1 %32
    • Pull the battery out using your finger.

  3. Sony Ericsson s710a LCD Screen Replacement: passo 3, imagem 1 %32
    • The battery can now be replaced.

    • The battery is a 780 mAh rechargeable Lithium Ion battery.

  4. Sony Ericsson s710a LCD Screen Replacement, LCD Screen: passo 4, imagem 1 %32
    • Remove the four 6mm phillips head screws located beneath the battery.

    • Set aside the screws in a designated container so that they can easily be found during reassembly.

  5. Sony Ericsson s710a LCD Screen Replacement: passo 5, imagem 1 %32
    • Remove microphone cover using a plastic opening tool.

  6. Sony Ericsson s710a LCD Screen Replacement: passo 6, imagem 1 %32
    • Remove the two 6mm screws on the front of the phone beneath the microphone cover.

  7. Sony Ericsson s710a LCD Screen Replacement: passo 7, imagem 1 %32
    • Remove the black plastic piece on the side.

    • This will allow for easier access while prying.

  8. Sony Ericsson s710a LCD Screen Replacement: passo 8, imagem 1 %32
    • Use the plastic prying tool to loosen the motherboard from the phone.

  9. Sony Ericsson s710a LCD Screen Replacement: passo 9, imagem 1 %32
    • Lift the motherboard out with your fingers once it is loose.

    • Pull slowly. This will require some force.

  10. Sony Ericsson s710a LCD Screen Replacement: passo 10, imagem 1 %32
    • Remove the two cable connectors using a plastic opening tool.

    • Mark the orientation and port of each cable before detaching them. The connectors are symmetrical, so this is essential for reassembly.

    • Place the motherboard aside in a safe location.

  11. Sony Ericsson s710a LCD Screen Replacement: passo 11, imagem 1 %32
    • On the rotational assembly.

    • Unscrew the four 3mm screws

    • Unscrew the two 2.3mm screws

    • Remember to keep the screws grouped away from the other screws in the device.

    • Lift this assembly off of the phone to allow access to the other half of the device.

  12. Sony Ericsson s710a LCD Screen Replacement: passo 12, imagem 1 %32
    • Detach the cable connectors on the other end of the cables using a plastic opening tool.

    • Remember to record the orientation and location of each connector.

  13. Sony Ericsson s710a LCD Screen Replacement: passo 13, imagem 1 %32
    • Remove the plastic cover on the back of the phone using a plastic opening tool.

    • Remove the two 6mm screws beneath this cover.

    • Also remove the two 6mm screws near the top of the phone.

  14. Sony Ericsson s710a LCD Screen Replacement: passo 14, imagem 1 %32
    • Pry away the screen assembly from the main case using a plastic opening tool.

  15. Sony Ericsson s710a LCD Screen Replacement: passo 15, imagem 1 %32
    • With face plate and LCD exposed, replace the existing cracked LCD with a new LCD if desired.

    • Be sure to test and make sure the detachable connections are arranged correctly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jamel Lugg

Membro desde: 10/29/11

1 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,465