Ir para o conteúdo principal

Sony Ericsson Z500a Keypad Replacement

O que você precisa

  1. Sony Ericsson Z500a Keypad Replacement, Keypad: passo 1, imagem 1 %32 Sony Ericsson Z500a Keypad Replacement, Keypad: passo 1, imagem 2 %32 Sony Ericsson Z500a Keypad Replacement, Keypad: passo 1, imagem 3 %32
    • Remove the back cover by pulling it down, and then take out the battery.

    • Using a T6 Torx screwdriver, remove the 4 screws.

    • Keep the phone open with the back cover facing you.

  2. Sony Ericsson Z500a Keypad Replacement: passo 2, imagem 1 %32
    • Use the plastic opening tool and run it between the case and the body of the device to loosen the keyboard

    • There are 2 clamps that lock the keyboard to the case (1 on each side)

  3. Sony Ericsson Z500a Keypad Replacement: passo 3, imagem 1 %32
    • Flip the phone over and lift straight up on the key pad to remove it.

    • Be sure to hold the phone flat (parallel to the table) so that no loose parts fall out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

Membro desde: 04/16/10

1 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 7-12, Maness Spring 2010 Membro de Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 2,719