Introdução

This guide shows how to remove the phone keypad.

Peças

Não são necessárias peças.

Remove the back cover and the battery.
  • Remove the back cover and the battery.

Adicionar comentário

Remove the 4 screws using a T6 precision screwdriver.
  • Remove the 4 screws using a T6 precision screwdriver.

  • Flip open the phone, and keep the back cover facing you.

Adicionar comentário

  • Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

  • Note: There are 2 clamps that lock it to the phone case (1 on each side).

Adicionar comentário

  • Flip the phone over and lift straight up on the key pad to remove it.

  • Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

Member since: 16-04-2010

1 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 7-12, Maness Spring 2010 Membro de Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

4 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 2,583