Introdução

This guide provides instruction for installing a motherboard for the Sony Ericsson TM506 cell phone.

Peças

Não são necessárias peças.

Firmly hold the phone between your fingers with your thumb on the battery cover. Push down with your thumb until the battery cover comes off. Push down with your thumb until the battery cover comes off.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

Adicionar comentário

Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver. Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver. Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

Adicionar comentário

Remove the two rubber casings for the top two screws with a plastic opening tool. Remove the two rubber casings for the top two screws with a plastic opening tool.
  • Remove the two rubber casings for the top two screws with a plastic opening tool.

Adicionar comentário

Unscrew these two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

Adicionar comentário

There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case. There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case. There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.
  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

Adicionar comentário

The sound box is attached to the case by two snap hooks. Lift the sound box up to remove it from the case. Lift the sound box up to remove it from the case.
  • The sound box is attached to the case by two snap hooks.

  • Lift the sound box up to remove it from the case.

Adicionar comentário

Locate the 80-pin connector. Carefully, lift up on the connector to separate it from the board.
  • Locate the 80-pin connector.

  • Carefully, lift up on the connector to separate it from the board.

Adicionar comentário

There are two snap hooks that attach the motherboard to the case. Using a plastic opening tool, carefully lift up on the motherboard to detach it. The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.
  • There are two snap hooks that attach the motherboard to the case.

  • Using a plastic opening tool, carefully lift up on the motherboard to detach it.

  • The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Daniel

Member since: 20-06-2012

71 reputação

14 Guides authored

Equipe

Cal Poly, Team 1-1, Regan SU 2012 Membro de Cal Poly, Team 1-1, Regan SU 2012

CPSU-REGAN-SU12S1G1

2 Membros

16 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 982